plastic lockers Fortress Lockers Systems™ 

Athletic Lockers. Our Plastic Lockers are Perfect for Athletic Lockers, Spa Lockers, Gym Lockers, Pool Lockers, Tropical Climate Areas, and more!  They last 10 times longer than wood lockers, metal lockers, or plastic laminate lockers, in humid areas!

olivegif.gif (811 bytes)

  Lockers Specifications






Lockers Specifications
Lockers Colors

>Sub-pages for this topic:




Up ]


Fortress Lockers Systems™  Specifications  -- Section [10500]  Lockers,   Plastic Lockers

All setup ... No Rust ...No Corrosion ...No Warping ... Perfect in any humid environment


Locker Material:   White Polypropylene, plastic -- smooth, glossy finish.


Sides   3/8" thick
Doors 1/2" thick
Shelf 3/8" thick
Backs 3/8" thick
Polypropylene is one of the most chemical resistant plastics.  Resists structural change from acids, salts, caustics, solvents and oils.  Polypropylene is extremely resistant to marking.  Easily cleaned with any non-abrasive cleanser. Permanent marker cleans away easily with acetone.
lockers Locker Construction: All setup construction, (delivered set up). Optional: kd configuration


100% setup box for strength and rigidity.       
Tallest standard size locker made in the world at 80", eliminating need for Z-shaped lockers in double tier configurations.
Our lockers give you 100% of the full size opening... 38.5" on standard double tier. 
Standard depth is at 18" ... allowing for coat rod in double tier units.
All lockers have a closed, setup base on each unit. 
All edges of polypropylene are finished and smoothed.  End panels are finished on all units ... no need to purchase additional end panels.
lockers Locker Hardware:
Cast\stamped, rust-resistant nickel plated.  110 open instant installed clip Euro-type heavy gauge hinge. Guaranteed for 5 years.
High-impact full grip nylon.    Screwed to the door in a complete penetration of the door.
ADA compliant.
Minimum one per door 35mm, 50% open nominal.  Color coordinated to trim color.
Decorative Trim Colors  (inlaid trim)
18 standard/ 100's of custom colors available.  Number plates are matched to trim color. Vents coordinated to trim.
Number plates:
Color matched to door trim.  Numbers are vinyl surfaced, and mounted to plate.
lockers Locker Locks:
  Standard > Hasp stainless steel 1/2" shaft with 10mm hole to accept padlock.  Two connection counter sink holes for attachment to side walls.
Optional > Master Key locks (from standard to "high security") die-cast security dyed lock with self contained locking bar; master keyed locks;  pin select locks ; Card locks; Coin locks; Coin return locks, Token locks; Digital locks and more!
lockers Locker Warranty:
All polypropylene components have a 10 year warranty; hasp and hinges have a 5 year warranty.
All warranties are based on normal use and are void if damage is due to vandalism, or incorrect usage of product.

Plastic Lockers Sizes:

Single Tier: 12"w x 18"d x 80"h
boot shelf, coat rod and hook included
Triple Tier: 12"w x 18"d x 25.5 (80) h
     Double Tier: 12"w x 18"d x 38.5 (80)h
coat rod and hook included
Quad Tier: 12"w x 18"d x 19"h (80)h
  *Also available in 12" deep size. No coat rod available for this size, hook only.

   Up ]

 Home ] [ Lockers Specifications ] Lockers Colors ]
Sub pages for this page: 

Lockers Home   Company     Trends in Health Club Lockers    About Moisture and Lockers    Lockers Features    Lockers Styles/Specs/Colors   Lockers Photo Gallery   Lockers Order Info    Contact Us   

Sub pages for this page:  Up



Home ] Up ] [ Lockers Specifications ] Lockers Colors ]

sub pages: 

Email , or Call Us for more information on our plastic lockers and locker bench systems at: 202-686-1511. Nationwide Sales.
Fortress Locker Systems™   Washington, DC 20015  USA

All contents Copyright 2015-1996  Fortress Lockers Systems™ . USA  All rights reserved.